濟南肯德基門在目前是很受歡迎的，那么對于肯德基門的安裝，大家知道都需要注意哪些問題嗎?肯德基門安裝中應避免工程質量通病，下面小編來介紹下吧。

Jinan KFC gate is very popular at present. Do you know what problems we need to pay attention to in the installation of KFC gate? Common engineering quality problems should be avoided in the installation of KFC doors. The following editor will introduce it.

⑴肯德基門門窗框臨時固定后，在填塞與墻體之間的縫隙前，注意不要使門窗框移位傾斜變形，應待門窗框安裝固定牢固后，再除掉定位木楔或其他器具。

(1) after the KFC door and window frames are temporarily fixed, before filling the gap with the wall, be careful not to shift, tilt and deform the door and window frames. After the door and window frames are installed and fixed firmly, remove the positioning wedges or other appliances.

⑵施工時嚴格做好產品保護，及時補封好破損掉落的保護膠紙和薄膜，并及時濺落在鋁門窗表面的灰漿污物。

(2) during construction, strictly protect the products, timely seal the damaged and fallen protective tapes and films, and timely remove the mortar dirt splashed on the surface of aluminum doors and windows.

⑶肯德基門玻璃厚度與扇挺鑲嵌槽及密封條的尺寸配合要符合標準及設計要求，安裝密封條時應留有伸縮余量。

(3) the thickness of KFC door glass and the size matching of fan support inlay groove and sealing strip should meet the national standards and design requirements, and expansion allowance should be left when installing the sealing strip.

⑷使用工具清理肯德基門表面時不得劃傷、割傷鋁合金型材表面。

(4) do not scratch or cut the surface of aluminum alloy profile when cleaning the surface of KFC door with tools.

⑸肯德基門表面污跡應用專門溶劑或潔凈的水及棉紗清洗掉，填嵌密封膠多余的膠痕要及時清理掉，確保完工的鋁門窗表面整潔美觀。

(5) the stains on the surface of KFC doors should be cleaned with special solvent or clean water and cotton yarn. The excess glue marks filled with sealant should be removed in time to ensure that the finished aluminum doors and windows are clean and beautiful.

肯德基門的玻璃搬運和安裝

Glass handling and installation of KFC doors

1）搬運玻璃前先檢查玻璃是否有裂紋，特別要注意暗裂，確認完好才搬運。

1) Before handling the glass, check whether there is crack on the glass, especially pay attention to the dark crack, and carry it only after it is confirmed to be intact.

2）搬運玻璃時須戴手套、穿長袖衫，玻璃要豎向，以防玻璃銳邊割手或玻璃斷裂傷人。

2) Wear gloves and long sleeved shirts when handling the glass. The glass should be vertical to prevent the sharp edge of the glass from cutting hands or the glass from breaking and hurting people.

3）高處安裝玻璃時應穩妥置放，其垂直下方不得有人。

3) When installing glass at heights, it should be placed safely, and there should be no one under it vertically.

4）風力五級以上難以控制玻璃時，應停止搬運和安裝玻璃。

4) When it is difficult to control the glass when the wind force is above five, the handling and installation of glass should be stopped.

此外肯德基門進入施工現場后應在室內豎直排放，產品不能接觸地面，底部用枕木墊平高于地面100MM以上，嚴禁與酸、堿性材料一起存放，室內應清潔、干燥、通風。更多相關內容就來我們網站http://www.hrshirt.cn咨詢吧。

In addition, KFC doors should be vertically discharged indoors after entering the construction site. Products should not touch the ground. The bottom should be leveled with sleepers more than 100mm above the ground. It is strictly prohibited to store with acid and alkaline materials. The room should be clean, dry and ventilated. Come to our website for more relevant content http://www.hrshirt.cn Consult.